Tag Archive for: damp

The fundamentals of retrofit

According to a recent article by John Cradden on Independent.ie, ‘The Tricky Economics of Greening your Home‘, it is essential to prioritise insulation and ventilation as opposed to more ‘trendy’ technologies when carrying out energy-saving retrofit on your home….

This view is also shared by RENOVA, home-energy experts, who always place importance upon the fundamentals of insulation and ventilation when carrying out a Deep Retrofit. It is very important to re-iterate this to home owners. Basically speaking, if a home is not well insulated and well-ventilated first, then installing modern technologies such as heat pumps and solar panels will make very little difference to your energy bills. So if you want to retrofit and improve your home’s overall energy-efficiency and BER, focus on upgrading the basic structure of the building first. Don’t be swayed by so-called ‘eco-bling’ and trendy new technologies.

According to architectural technologist and energy consultant Archie O’Donnell “Over the years, there have been a lot of low-energy new builds and retrofits, but we generally find that when consumers go to home-improvement shows, when they read the glossy magazines and start to research the whole area of low-energy, they are immediately drawn to the technology. You have to think of retrofit like a stool with three legs . We’re very good in this country at addressing one leg, which is reducing energy in new builds and in a retrofit. What we’re quite bad at is the other two legs, which are moisture and ventilation.”

At RENOVA we agree with O’Donnell’s views on retrofit and appreciate the importance of ‘building tight and ventilating right’. We highly recommend the inclusion of these fundamentals before contemplating the installation of renewable technologies such as solar thermal panels for water heating, biomass boilers, heat pumps etc. These are also beneficial, but should not be considered before other retrofit measures – namely, insulation and ventilation.

Insulation

 

 

Interestingly, a theme of enquiry from home owners has been recurring at RENOVA over recent years. The common problem is ‘condensation’ and in many cases black mould growth on walls and ceilings. This is caused by high levels of humidity. It thrives on two ingredients, high temperatures and a supply of water vapour. As a general rule of thumb, humidity levels will double with every 10 degree increase in temperature. In other words, the warmer your house is, the more water vapour the air will hold. As your house becomes more air-tight and warmer, stale humid air can become trapped inside. Think of all that moisture from showers, baths, kettles, bubbling pots and pans, steamers, tumble driers and even our own breath! Fitting new windows and having a more air-tight, well-insulated home, without proper ventilation therefore, has become the main cause of poor air quality and ‘sick building syndrome’.

Ventilation- fundamentals of retrofit

A RENOVA retrofit will not only be air-tight and well-sealed; most importantly, it will be well-ventilated. ‘Air-tightness’ and ‘ventilation’ must go hand-in-hand to prevent an unhealthy living environment. Good ventilation requires maintaining a constant flow of air within a house – fresh air in and stale air out. Good ventilation will remove the humid air before it has a chance to condense on relatively cold surfaces. If left untreated, damp can lead to a host of problems. Problems such as corrosion of internal finishes and even health problems. This is dangerous especially in vulnerable young children, elderly people and individuals with respiratory problems such as asthma.

Whilst passive/natural ventilation (holes in the external walls) may meet building regulations, we recommend that controlled/mechanical ventilation is used to maintain a consistent flow of fresh air within the home. There are many sophisticated systems available such as ‘Heat Recovery Ventilation’. However, this can be expensive and difficult to install, especially in a retrofit situation. A cost-effective and practical alternative is an ‘Aereco Demand Controlled Ventilation’ system. Click here to see an Aereco video.

DCV or ‘Demand Controlled Ventilation’ is based on a simple principle. Have the optimum amount of fresh air in a home on a fully automated basis. It offers the ideal solution concerning both heating consumption and the indoor air quality. When the need for ventilation is low, which is usually more than half of the time, savings can be made. More ventilation is needed during times such as showering and cooking. When more moisture and humidity is created. Scientific studies have illustrated that DCV can result in 30% reduction in ventilation losses compared to natural ventilation.

A point made by architect Bill Scott of Scott and MacNeil Architects, is that undertaking a number of different retrofit measures does not result in a ‘multiplier effect’. Tom Halpin, SEAI’s head of information says that installing three typical energy-saving measures in your home that each results in a 20-25% in cost savings individually, should still result in reducing the average heating bill by about half.

So, if you are considering a retrofit of your home, remember to make insulation and ventilation a priority. If you are renovating your home, please remember to retrofit it too. Any renovation without a retrofit is a lost opportunity to create a warm, comfortable, energy-efficient and healthy home.

For a free, no obligation consultation contact RENOVA today

Tel: 01 2021122

Email: info@renova.ie

Web: www.renova.ie

 

Why older homes are less energy efficient

Owning an older home can bring with it certain challenges. Generally older homes are less energy efficient. With advances in technology, a newer built home is much more likely to be up-to-date on the latest insulation techniques. But what about existing homes? If you’re living in an older property, then upgrading its energy rating may seem impossible. Not to worry, there are several easy ways you can save money by improving your older abode without compromising its charm. In this article we will discuss why older properties may find themselves at a disadvantage when it comes to energy efficiency & cost savings and how you can make improvements that will keep your house running efficiently for years.

Older homes, can they be updated…

As a general rule it costs about 3 times as much to heat a 1980’s house as opposed to an energy efficient modern house. Even then they are still draughty and miserable.  The good news is that any older home can be improved to be as good as an energy efficient modern home, through Deep Retrofit. So don’t be afraid to buy an older home, but do make yourself aware of what you need to do to improve it, and what this will cost before committing to a purchase. To understand the potential of that run down old house you should first of all get an understanding of the many reasons why older homes are not energy efficient:

Insulation, and the lack of it …

This is the major problem in older homes. Heat is generated, put into our homes … and it immediately escapes, so we need to generate more heat, and so on and so on …

In order to be more energy-efficient, our homes need be insulated in three different areas – the external walls, the ground floor and roof/attic. By and large the levels of insulation in older houses is hopelessly inadequate or worse still it is non-existent . Many of these older homes have no wall insulation at all. Homes that do have it are insulated to a very poor standard. Newer homes may be insulated, but unfortunately also to a very low level. These houses are often insulated within the cavity between 2 skins of blockwork external walls. The major problem with this cavity wall insulation is that it was installed during the build by block-layers. Getting a block-layer to insulate your house ‘while he’s at it, laying blocks’ is no way to insulate a house. Yet, this is the way it has been done for years.

No Insulation under the floor

No insulation underneath the ground floor is another problem which makes older homes less energy efficient. Particularly in relation to houses with suspended timber ground floors. On average 7 – 10% of heat escapes through an uninsulated floor, but worse still, coldness enters our homes through the floor and draughts whip up through unsealed floor boards. No wonder it’s cold and less energy efficient in a house with nothing at all between you and the cold earth beneath. This ground floor arrangement is common place and people don’t realise just how bad it is – carpet covers a multitude.

Attic Insulation

With regard to attic insulation, the acceptable thickness for attic insulation just 10 years ago was 100mm. Today, the minimum is 300mm thickness. Unless you’ve had your insulation upgraded in the last few years, chances are you are living under a couple of inches of ill-fitting attic insulation, which means that your home less energy efficient because heat is escaping. As approximately 30% of the heat in a home escapes through the roof, attic insulation is of utmost importance. To make matters worse, the typical old ‘attic hatch’ is a weak point too, as it allows heat to escape and draughts to flow in. Sometimes these even ‘flap in the wind’ on a windy night. Replace this with an insulated draught-proof attic door to make your home more energy efficient.

Old windows & doors … heat escaping and draughts getting in.

Rattly old windows and doors are another very common feature of older, less energy efficient houses. Even relatively ‘modern’ windows have poor U-values and draught seals compared to good quality, modern ones. The U-Value of a window represents the degree to which a window retains heat. The lower the U-Value, the better the window. Approx 15% of heat escapes through bad quality windows and doors. Install energy efficient windows with a value of 1.0 or less to fix this problem.

Old appliances and lighting

Believe it or not, the energy required to light an older home can be 80% higher than lighting a modern home with energy efficient lights. All you have to do is replace incandescent bulbs with energy efficient LED lighting to save up to 80% of the cost of lighting your home. Also, the ambiance and atmosphere of your home can be greatly enhanced with the clever use of bulb and lamp types. Likewise, by replacing household appliances with new, energy-efficient A or B rated ones, running costs can be reduced by 50%.

Open fires … money up the chimney!

Open fires are the norm in an older home, and very often there are several. They are not energy efficient and are a significant cause of draught. Open fires can be as low as 15% efficient, meaning that 85% of the heat generated is lost up the chimney! A stove, in comparison is more than 80% energy efficient. A stove will also help to eliminate draughts as it will seal in the chimney flue, thus minimising ‘up draught’ which draws draughts into your home. A ‘room sealed’ stove will completely eliminate ‘up-draught’.

Inefficient Heating Systems

Old boilers are not energy efficient. Typically, just 65% or less of the energy in the oil burned in an older boiler is transferred into heat in the house. 35% of energy purchased in the form of fuel is just wasted. Or, 35c in every Euro spent is wasted. By comparison, modern condensing boilers are 95% energy efficient, meaning that 95% of the energy is converted into heat in your home.

To make matters worse older homes tend not to have ‘heating controls’. This means only one heating circuit for the whole house, making a typical older home less energy-efficient. The result, the whole house is heated even if just part of the house is in use. Installing heating controls reduces the amount of heat used in the home, which in turn saves money. Heat only the rooms/floor levels you are actually using. Use a thermostat to control the temperature. These simple methods will save you money on heating bills and use energy more energy efficient way.

The solution to all of these inadequacies lies in ‘Deep Retrofit’, the complete upgrade of the fabric of your building.

 

Web: www.renova.ie

Tel: 01 2021122

Email: info@renova.ie

Tag Archive for: damp